To be used with Instructor Guide of the same title under call number TK 4660 G37 GUIDE 2003 and binder of quizzes in the Circulation Shelves under call number TK 4660 G37 QUIZ 2003.

DVD 1 -- Topic 1 Gas Tungsten Arc Welding, Course Overview -- Topic 2 Introduction to Gas Tungsten Arc Welding -- Topic 3 Safety & Health of Welders -- Topic 4 Equipment Setup Adjustment and Shut Down -- Topic 5 Stringer Bead, Flat Position (Carbon Steel) -- Topic 6 The Essentials of GTAW -- DVD 2 -- Topic 7 Fillet Weld, Lap Joint, Horizontal and Flat Positions (Carbon Steel) -- Topic 8 The Metallurgy & Weldability of Carbon Steel -- Topic 9 Fillet Weld, Outside Corner Joint, Flat Position (Carbon Steel) -- Topic 10 Fillet Weld, T-Joint, Horizontal Vertical Up & Flat Positions (Carbon Steel) -- Topic 11 Fillet Weld, T-Joint, Overhead Position (Carbon Steel) -- Topic 12 Square-Groove Weld, Butt Joint, Flat Position (Carbon Steel) -- Topic 13 Square-Groove Weld 1G Destructive Test (Carbon Steel) -- Topic 14 Square-Groove Weld, Butt Joint, Horizontal &Vertical Up Positions (Carbon Steel) -- Topic 15 Square-Groove Weld, Butt Joint, Overhead Position (Carbon Steel) -- DVD 3 -- Topic 16 Introduction to GTAW Using Pulsed Current -- Topic 17 Square-Groove Weld, Butt Joint, Flat Position (Stainless Steel) -- Topic 18 The Welding Characteristics of Stainless Steel -- Topic 19 Square-Groove Weld, Butt Joint, Horizontal Position (Stainless Steel) -- Topic 20 Fillet Weld, Lap Joint Horizontal & Flat Positions (Stainless Steel) -- Topic 21 Fillet Weld, Outside Corner Joint, Flat Position (Stainless Steel) -- Topic 22 Fillet Weld, T-Joint, Horizontal, Vertical Up & Flat Positions (Stainless Steel) -- Topic 23 Visual Inspection Test, Stainless Steel -- DVD 4 -- Topic 24 The Welding Characteristics of Aluminium -- Topic 25 Stringer Bead, Flat Position (Aluminium) -- Topic 26 The Effect of Process Variables on the Welding Arc -- Topic 27 Fillet Weld, Outside Corner Joint, Flat Position (Aluminium) -- Topic 28 Fillet Weld, Outside Corner Joint, Vertical Position (Aluminium) -- Topic 29 Fillet Weld, Lap Joint, Horizontal & Flat Positions (Aluminium) -- Topic 30 Square-Groove Weld, Butt Joint, Flat Position, Up (Aluminium) -- Topic 31 Fillet Weld, T-Joint, Horizontal & Flat Positions (Aluminium) -- Topic 32 Fillet Weld, T-Joint, Vertical Position, Up (Aluminium) -- Topic 33 Visual Inspection Test, Aluminium.

This DVD set consists of 33 modules. There are 23 skills modules - 9 modules cover esssential theory, and 1 module provides a course overview. Skills modules include: *9 modules on 16-and 11-gauge (1.6 and 3.2mm) carbon steel in all positions, including one module (topic 13) devoted to performing an AWS standard bend test. *6 modules on 16-gauge (1.6mm) stainless steel (flat, vertical & horizontal positions), including one module (topic 23) devoted to the visual inspection of stainless steel *8 modules on 0.125 inch (3.2mm) aluminium (flat, vertical & horizontal positions), including one module (topic 33 devoted to the visual inspection of aluminium. Theory modules include: an Introduction to GTAW; Safety; Equipment Setup, Adjustment & Shut Down; The essentials of GTAW; The Metallurgy & Weldability of Carbon Steel; Introduction to GTAW Using Pulsed Power; The Welding Characteristics of Stainless Steel, The Welding Characteristics of Aluminium; and The Effect of Welding Process Variables on the Welding Arc. Each module in the course is designed to move the student from a position of relative inexperience with gas tungsten arc welding, to a point where they have mastered the essential skills and knowlege necessary to be qualified as an entry-level GTAW welder as defined in AWS EG2.0 and QC10. .

DVD